CARE INSTRUCTIONS & STYLING TIPS

60/40 Blend (60% Human Hair/ 40% Heat Friendly Fiber Blend

PRE-WASH
• Gently remove tangles with fingers or a wide-tooth comb. Start at the ends and slowly work toward the roots to avoid damage. Do not brush.

WASH
• Do not soak or submerge product. Rinse by holding under running cool water. Allow the water to run from roots to ends.

• Place a small amount of shampoo for color-treated hair in your hand, evenly and gently stroke it through the human/ synthetic blend hair in a downwards motion from the roots to the ends. Do not rub.

• Rinse by holding under running cool water until the water runs clear. Gently squeeze to press out excess water. Do not twist or wring.

CONDITION
• Place a small amount of conditioner for color-treated hair in your hand, evenly and gently work it through the human/ synthetic blend hair in a downwards motion from the mid-shaft down to the ends avoiding the base and root. Applying conditioner to the base may cause shedding.

• Leave conditioner on for 1-2 minutes or follow the conditioner manufacturer’s instructions. Do not exceed 3-5 minutes.

• Rinse by holding under running cool water until the water runs clear. Gently squeeze or use a clean, dry towel to press out excess water. Do not twist or wring.

• Place wet wig on a folding HairUWear Wig Stand until it is completely dry.

• Finger styling is recommended.

STYLING
• Style as desired with heat up to 350°F/ 180°C.

• To straighten, take a 1 inch section starting at the roots and run a flat iron to the ends.

• To curl, wrap the hair around a curling iron.

TIPS & TRICKS
• Wash or rinse all human/ synthetic blend hair products and style before wearing. Human/synthetic blend hair is not ready to wear out of the box.

• Rinsing with hot water will damage the cap.

• Do not dry on a solid form or mannequin head to avoid stretching the cap.

• We do not recommend sleeping, showering or swimming during wear.

• Store the wig on a Wig Stand to avoid unwanted kinks or crimps.

• Lace is delicate and should not be tugged or pulled.

• Avoid brushing when wet to prevent damage.

• Any cutting should be done by a professional hair stylist. We do not recommend lifting or bleaching human/ synthetic blend hair. No returns or exchanges will be allowed for worn or altered products.

Heat Friendly Synthetic Fiber

PRE-WASH
• Gently remove tangles with fingers or a wide-tooth comb. Start at the ends and slowly work toward the roots to avoid damage. Do not brush.

WASH/CONDITION
• Add a small amount of wig shampoo to a washbasin of cool water. Use shampoo sparingly.

• Place product in washbasin and allow it to soak for 5 minutes. Do not scrunch or agitate the product. 

• Rinse by holding under running cool water until the water runs clear. Gently squeeze or use a clean, dry towel to press out excess water. Do not twist or wring.

• Apply a light coat of wig Leave-in Conditioner + Detangler avoiding the base and roots. Applying conditioner to the base may cause shedding.

• Finger styling is recommended.

STYLING
• Shake and style with your fingers to achieve the desired look. 

• Apply a light mist of wig Leave-in Conditioner + Detangler to difficult tangles if needed.

• Heat-friendly synthetic fiber can be curled, blow dried or flat ironed to achieve a different hairstyle.

• Heat-friendly synthetic fiber can withstand heat up to 350°F/180°C. We recommend a low-medium setting 

STYLE AS DESIRED:
• To straighten, take a 1 inch section starting at the roots and run a flat iron to the ends.

• To curl, wrap the hair around a curling iron and hold for 10 seconds. Carefully slide the iron out and pin the curl in place. Once the fiber has completely cooled it will keep the curl until heat is applied again.

• If desired, use HairUWear Hair Spray on the final styled product.

TIPS & TRICKS
• Soaking longer than the recommended time will damage the product.

• Hot water will damage heat-friendly synthetic fiber.

• Sudden bursts of heat, such as opening an oven door, will damage heat-friendly synthetic fiber.

• Do not dry on a solid form or mannequin head to avoid stretching the cap. • We do not recommend sleeping, showering or swimming during wear.

• Store the wig on a Wig Stand or hair piece on a Wig Hanger to avoid unwanted kinks or crimps

• Lace is delicate and should not be tugged or pulled.

• After extended wear, matting and frizz can occur. To smooth, wash, condition and spray with a wig Leave in Conditioner + Detangler then blow dry with a Styling Brush.

• Heat-friendly synthetic fiber can withstand heat up to 350°F/180°C. We recommend a low-medium setting. Fiber will be damaged if the heat setting is too high. We do not recommend curling or straightening the hair while wearing. Heat-friendly synthetic fiber will get very hot.

• Any cutting should be done by a professional hair stylist. No returns or exchanges will be allowed for worn or altered products.